What Call for Service Means
JennAir's built-in refrigerator page for a blinking or flashing Call for Service light offers one step and no part: a power reset, with the breaker off for five minutes rather than the one minute used on JennAir's cooking appliances. The longer interval is the only detail the page gives about what is going on.
Common Causes of Call for Service
- A control problem caught by the refrigerator's own self-check
- A sensor feeding the control a reading it cannot use
- Control damage after a power outage or surge
🔧 One Safe Check You Can Try
Switch the refrigerator off at the breaker for a full five minutes, restore power, and watch the panel for a couple of minutes - JennAir specifies five minutes here rather than one, so a shorter reset does not count as having tried.
⚠ Why You Shouldn't Go Further Than That
- JennAir names no part on this page, so there is nothing to order, and buying a control board on the strength of a general service prompt is a costly guess.
- Reaching the control on a built-in column means drawing a heavy, flush-fitted appliance out of its cabinetry without marking the panels it sits between.
- A refrigerator that has been reset and is quietly not cooling can empty a full freezer before anyone notices, so the temperature is worth watching while you wait for a visit.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- Call for Service
- Appliance
- JennAir refrigerator
- Maker documentation
- JennAir owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Whirlpool Corporation.