What FEE6 Means
JennAir's FEE6 range page names the main cavity bake element or the associated wiring. Among the range codes this is one of very few that points straight at a heating element rather than at electronics, which makes it unusually actionable.
Common Causes of FEE6
- A bake element that has gone open circuit
- A burnt terminal where the element connects at the rear of the cavity
- Damaged wiring in the bake element circuit
🔧 One Safe Check You Can Try
With the oven cold, look at the bake element across its whole length for a blister, a break or a bright scorch mark near either end - a failed element often shows itself plainly once you know to look.
⚠ Why You Shouldn't Go Further Than That
- Element terminals carry the full oven current and can stay hot enough to burn well after the cavity feels cool.
- A terminal that has been arcing usually damages the wire and the ceramic block behind it, and fitting a new element to a damaged block simply repeats the failure.
- Element fixings pass through the cavity rear wall into the space behind it, where the wiring is not visible from inside the oven at all.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- FEE6
- Appliance
- JennAir range
- Maker documentation
- JennAir owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Whirlpool Corporation.