What F2 Means
F2 on the oven side of a JennAir range means the control has detected the cavity running hotter than the temperature it's actually set to - an over-temperature condition, not just a drifting reading.
Common Causes of F2
- A temperature sensor (RTD) reading incorrectly or failed
- A relay board stuck energizing the heating element past the point the control is calling for
- A control board that isn't reading the sensor signal correctly
🔧 One Safe Check You Can Try
Power the range down at the breaker immediately if F2 appears during a bake or broil cycle, and don't restart a cycle until it's been checked - an oven that's genuinely overheating past its set point is a safety-relevant problem, not one to work around.
⚠ Why You Shouldn't Go Further Than That
- Confirming whether the sensor or the relay board is stuck requires testing the range live at the exact point of the problem, which carries real shock and burn risk without the right equipment.
- A relay stuck closed can, in rare cases, keep heating the cavity even with the range powered down at the control - that's a scenario a technician checks for, not something to assume is safe.
- Replacing the temperature sensor first is the common guess, but if a stuck relay is the actual cause, the new sensor won't fix an oven that keeps overheating.
- Opening the rear control housing exposes the terminal block where the supply lands, and a cover left off or refitted loose there stays a hazard long after this problem is gone.
Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.
Technical Reference
- Code
- F2
- Appliance
- JennAir range
- Maker documentation
- JennAir owner manuals and use & care guides
- Checked
- September 2026
Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Whirlpool Corporation.